标准资料网-标准资料免费资源平台

Product Code:SAE J2470
Title:Hydraulic Fluid Power - Valves - Method for Assessing the Lock Sensitivity to Contaminants
Issuing Committee:Ship Fluid Systems Committee
Scope:This SAE Recommended Practice defines a procedure, which will aid in assessing the contaminant sensitivity of hydraulic valves. The approach taken defines a test procedure with flexibility for testing valves in a wide range of contamination levels. The user of this procedure must establish the contamination levels for testing. Three levels are suggested which should cover the range for most valve applications. This procedure does not establish the contaminant sensitivity requirements for any valve. The user of this procedure needs to be aware of the system contamination level that the valve will operate in and select test contamination levels significantly higher than the operating level to assess the suitability of the valve. The test procedure permits a valve to be tested without disassembly and therefore permits protection of proprietary design information.This procedure assesses the contamination sensitivity of valves by contaminant lock. The procedure indicates the sensitivity of valves by contaminant lock due to various sizes of contaminants. The test is designed to assess the contaminant sensitivity of valves in tests of relatively short duration. See Appendix A for guidance as to how the tests and their results may be used.The tests are purposely designed to be severe in order to be applicable to a wide range of contaminated environments. The use of valves in many applications and for various purposes results in differing levels of acceptable performance. That is, the same valve may be unacceptable - in relation to operation in a contaminated environment - in one application and be acceptable in another. The user must make that decision based on a review of the expected level of the specific application and the test results obtained.NOTE - See 7.2 if document is to be contractually invoked.【英文标准名称】:Manipulatingindustrialrobots--Safety
【原文标准名称】:操作型工业机器人.安全性
【标准号】:JISB8433-1993
【标准状态】:现行
【国别】:日本
【发布日期】:1993-12-01
【实施或试行日期】:
【发布单位】:日本工业标准调查会(JP-JISC)
【起草单位】:TechnicalCommitteeonIndustrialAutomation
【标准类型】:()
【标准水平】:()
【中文主题词】:安全装置;自动控制系统;安全教育;工业的;安全工程;机器人
【英文主题词】:robots;automaticcontrolsystems;industrial;safetydevices;safetyeducation;safetyengineering
【摘要】:この規格は,3.で定義されている産業用マニピュレーティングロポット及びロボットシステムについての設計,製作,プログラミング,運転,使用,保守及び修理に対して,安全上考慮すベき点についての指針である。この規格において確立された安全上の原則は,ほかのタィプのロポットにも適用できる可能性があるが,適用しない。
【中国标准分类号】:L66
【国际标准分类号】:25_040_30
【页数】:20P;A4
【正文语种】:日语